Badheizkörper-Zubehör
Prod. no.:
839429
Zehnder Connection fitting type Q with thermostat design corner shape, valve and flow on the left side
- Design corner shape valve and flow left- for one and two pipe systems (connection dimension 50mm)- Valve body with presettable valve insert (presetting 1-7) and thermostatic threaded connection M 30 x 1.5- flow / return can be shut off- connection valve adjusted for two-pipe operation- can be used for single-pipe operation by opening the concealed bypass screw on the return pipe- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- special painting on customer's request, for order with radiator we understand the color 1:1 to the radiator, for single order we ask for communication of the color request- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to pipe
Prod. no.:
839171
Zehnder Connection fitting type U design swiveling
- Swivel-mounted design for optional connection from / to bottom or from / to rear- for one and two pipe systems (connection dimension 50mm)- rotatable, i.e. valve or flow optionally right or left (flow on valve side)- Valve body with presettable valve insert (presetting 1-7) and thermostat threaded connection M 30 x 1.5- flow / return can be shut off- connection valve adjusted for two-pipe operation- can be used for single-pipe operation by opening the concealed bypass screw on the return pipe- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- 1/2" transition to the radiator in chrome- white- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to pipe
Prod. no.:
FUNKEMPFDEDOA
Redwell Radio receiver for heating control
- Design: Surface mounted- Control: PI control or On / Off- radio protocol: X2D or X3D, switchable- factory setting: X2D- radio frequency: 868 MHz- LED for output status indication- electr. connection: screw terminals- supply voltage: 230 VAC- output: 230 V, 16 A
Prod. no.:
841271
Zehnder Thermostat Design Line
- with built-in liquid sensor- set point range 6,5 - 28 degrees- lockable to individual set point- thermostat thread connection M30 x 1,5- white
Prod. no.:
819080
Zehnder Zehnder Thermostat "SH" White
- Elegant thermostat with built-in liquid sensor- tested according to EN 215- Set point range 7 to 28 degrees- Version with zero setting- Thermostat threaded connection M 30 x 1.5 mm with chrome-plated union nut- white
Prod. no.:
839051
Zehnder Connection fitting type P Angle design, valve and flow on the right side
- Design corner shape valve and flow right- for one and two pipe systems (connection dimension 50mm)- Valve body with presettable valve insert (presetting 1-7) and thermostatic threaded connection M 30 x 1.5- flow / return can be shut off- connection valve adjusted for two-pipe operation- can be used for single-pipe operation by opening the concealed bypass screw on the return pipe- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- 1/2" transition to the radiator in chrome- white- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to pipe
Prod. no.:
839101
Zehnder Connection fitting type Q Angle design, valve and flow on left side
- Design corner shape valve and flow left- for one and two pipe systems (connection dimension 50mm)- Valve body with presettable valve insert (presetting 1-7) and thermostatic threaded connection M 30 x 1.5- flow / return can be shut off- connection valve adjusted for two-pipe operation- can be used for single-pipe operation by opening the concealed bypass screw on the return pipe- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- 1/2" transition to the radiator in chrome- white- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to pipe
Prod. no.:
962161
Zehnder Mounting kit for Zehnder Vitalo Bar/Spa White
- 4 wall brackets consisting of wall sleeve (60mm) with threaded pin- 4 spacers with thread- incl. fixing material (plastic dowels, hexagon screws, washers)- 1 hexagon socket wrench SW 2.5 mm- 1 design vent valve- assembly instruction- white (RAL 9016)- for radiator Vitalo Spa/Bar
Prod. no.:
858151
Zehnder Heater rod IHE 300 watt
- Protection class IP65- for mains voltage 230V- with screw-in thread G 1/2"- with 3-wire connection cable 1,2m long- with Schuko plug- temperature limitation of the heat transfer fluid to approx. 70 degrees- with dry run protection- housing and cable in white- suitable for Yucca, Metropolitan, Ribbon, Quaro, Subway, Universal, Toga, Forma, Troja, Zeno
Prod. no.:
838941
Zehnder Valve set Type C Version Straightway
- Valve body and return screw connection- Design straight through 1/2"- valve body with presettable valve insert (presetting 1-7) and thermostatic threaded connection M 30 x 1.5- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- 1/2" transition to the radiator in chrome- white- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to the pipe
Prod. no.:
954101
Zehnder Mounting kit for Zehnder Subway electric operation White
- 4 wall brackets consisting of wall sleeve (40mm) with grub screw- spacer (32mm)- incl. fixing material (plastic dowels, hexagon screws, washers)- 1 hexagon socket wrench SW 2.5 mm- assembly instruction- white (RAL 9016)- for radiators Subway electric operation
Prod. no.:
ZEPELK04SW
BEMM Electric immersion heater P series with radio room control comfort
- Electric heating element P series with radio room control comfort, consisting of electric heating element with PTC element, IP55, class I, with approx. 1.0 m connection cable u- Radio receiver, for mounting and connection to flush-mounted box, class II, 230 VAC, maximum switching capacity 16 A, IP30, white housing dimensions 87x87x20mm (WxHxD), as well as radio room thermostat, digital with weekly program with 9 preset programs, individually programmable, holiday function, frost protection and party function- individually programmable, vacation and party function, frost protection function, button lock, setting range 5 - 35 degrees C- IP30, incl- 2 batteries type AAA LR03 1.5 V, white plastic housing and cable, dimensions 83x80x27 mm (WxHxD)- Control complies with the Ecodesign Directive for individual room heaters
Prod. no.:
ZEPELS04
BEMM Electric heating element P series with plug
- P series electric immersion heater with plug, heating element with PTC element, protection class IP55, class I, mains voltage 230 V, stainless steel immersion body with DN 15 (1/2) connection thread, O-ring and hexagon with approx. 1.0 m connection cable with stranded wire- For use as an individual room heater, add the required control unit (following pages) or on site (Smarthome)
Prod. no.:
ZENELM04CR
BEMM Electric immersion heater series N with medium temperature controller
- Electric heating element N series with medium temperature controller, heating element consisting of electric heating element with NTC thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Heating rod and NTC temperature sensor (medium temperature) connected to medium temperature controller, mains voltage 230 V / 50 Hz, IP44, class I, connection cable approx. 0.8 m with safety plug, setting range 20 degrees C to 65 degrees C (surface temperature approx. 18-50 degrees C), timer for 3 different boost functions (maximum heating power to 65 degrees C from the set target temperature, standby mode (i.e. without heating function), indicator lamp, chrome-plated plastic housing, grey cable- Dimensions 115x70x38 mm (WxHxD)- For towel warmers for use with underfloor heating or other central heating radiators for room temperature control
Variants from €187.13*
Prod. no.:
976021
Zehnder Connection fitting with short bezel for Yucca White
- Nickel plated- for one and two pipe systems (connection dimension 50mm)- Version connection fitting for hot water operation => short orifice plate- valve right- presettable valve insert- flow on both sides- for thermostat M 30 x 1,5 mm- connections to the back 3/4" AG- flow/return can be shut off- with connection 1/2" for electric heating cartridge on the left (installation possible later when the fitting is removed)- connection fitting adjusted for 2-pipe operation, can be used for 1-pipe operation by opening the bypass screw- standard delivery with shapely cover in the color of the radiator- Thermostat at extra charge- Operating overpressure max. 10 bar
Prod. no.:
925021
Zehnder Mounting kit for Zehnder Toga electric operation White
- 3 wall brackets consisting of wall sleeve (60mm) with grub screw- combination spacer (40mm) and clamping piece- incl. fixing material (plastic dowels, hexagonal bolts, washers)- 1 hexagon socket wrench SW 2.5 mm- assembly instruction- white (RAL 9016)- for radiator Toga
Prod. no.:
774401
Zehnder Mounting kit for Zehnder Charleston Mirror/Bar White
- 4 wall brackets CVD0- 4 brackets BH- 2 safety springs- assembly instruction- white (RAL 9016)- for radiator Charleston Bar/Mirror
Prod. no.:
952101
Zehnder Mounting kit for Zehnder Subway White
- 4 wall brackets consisting of wall sleeve (40mm) with grub screw- spacer (32mm)- incl. fixing material (plastic dowels, hexagon screws, washers)- 1 hexagon socket wrench SW 2,5 mm- 1 design vent valve 1/2"- 2 dummy plugs 1/2"- assembly instruction- White (Ral 9016)- for radiator Subway
Prod. no.:
962181
Zehnder Mounting kit for Zehnder Vitalo Bar/Spa for electric operation, white
- 4 wall brackets consisting of wall sleeve (60mm) with threaded pin- 4 spacers with thread- incl. fixing material (plastic dowels, hexagon bolts, washers)- 1 hexagon socket wrench SW 2.5 mm- assembly instruction- white (RAL 9016)- for radiators Vitalo Spa/Bar electric operation
Prod. no.:
839419
Zehnder Connection fitting type P with thermostat design corner shape, valve and flow on the right side
- Design corner shape valve and flow right- for one and two pipe systems (connection dimension 50mm)- Valve body with presettable valve insert (presetting 1-7) and thermostatic threaded connection M 30 x 1.5- flow / return can be shut off- connection valve adjusted for two-pipe operation- can be used for single-pipe operation by opening the concealed bypass screw on the return pipe- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- special painting on customer's request, for order with radiator we understand the color 1:1 to the radiator, for single order we ask for communication of the color request- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to pipe
Prod. no.:
Z-FTHA-UP
infranomic Radio thermostat analog with flush-mounted receiver, Elektrobock
- Radio thermostat Elektrobock
Prod. no.:
838981
Zehnder Valve set type G Angle corner right version
- Venil body version WInkeleck right 1/2" and return fitting version Eckform 1/2"- Execution angle form 1/2"- valve body with presettable valve insert (presetting 1-7) and thermostat threaded connection M 30 x 1.5- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- 1/2" transition to the radiator in chrome- white- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to the pipe
Prod. no.:
838891
Zehnder Valve set type B version Angle shape
- Valve body and return screw connection- Angle design 1/2"- valve body with presettable valve insert (presetting 1-7) and thermostat threaded connection M 30 x 1.5- including 2 x 3/4" union nut Eurocone diameter 16,8mm in surface color of the valve body as transition to the pipe- 1/2" transition to the radiator in chrome- white- Note: all valves/connection fittings are delivered with handwheel as protection cap (thermostat to be ordered separately) and union nuts as transition to the pipe